450 Niagara Street
Buffalo, New York 14201
Phone: (800) 862-5529 (716) 854-2700 Fax: (716) 854-270

welcome.gif (28688 bytes)

Support
Split C/Ku Using DiSeqC Switch

help_key.jpg (4776 bytes) This section describes how to split your C and Ku signal using a DiSeqC switch.
  • Connect the C band to terminal Port A, and the Ku band to terminal Port B of the A/B switch.
  • Connect the output of the switch (marked RX) to the Sat Cruiser.
  • The 2way DiSeqC switch, 2 HF splitters and 5 RG-6 cables are sold as a kit. Part number KIT2DISEQ-100

Programming the Satcruiser

  • Press Menu

  • Press Installation, OK

  • Press TP Configuration, OK

  • At the satellite name,  select the satellite. For the 101 Ace/Plus, press Ok, select the satellite, then press OK again. For 201P and 301 use the volume keys to select the satellite.

  • Move down to the LNB field and press OK

  • For Ku band satellites set the DiSeqC setting to DISEQ2, for C band satellites leave it DISEQ1.

  • The receiver is now ready to select the appropriate LNB automatically.

 

diseqc-c-ku.jpg (39568 bytes)

_________________________________________________________________________________
Home
  |  Orders  |  Products   |   Support  |  Dealers  |  Programming  |  News  |  Contact Us